SERGER STITCHES TROUBLESHOOTING

Serger stitches troubleshooting. The goal of troubleshooting is to find out why something isn’t working as expected and explain how to fix the problem. The first step in the troubleshooting process is a complete description of the problem. Every seamstress loves sewing with a serger. It’s fast and the finish looks so professional. But when something goes wrong, it can be difficult to know where to start troubleshooting your serger. Here’s what to check when something goes wrong with your serger:

There is no worse feeling than getting to work and finding out that your machine is not cooperating or has broken down. It can be broken needles, broken or tangled threads, or even missed stitches, which can give you a frustrating experience of what you want to do.

Fortunately, serger troubleshooting can help you solve most problems without having to leave the machine for expensive repairs. To help you manage your serger properly, we’ve put together some common sewing machine problems and how to fix them to ensure you can resolve the problem and pick up the project where you left off.

[lwptoc]

SERGER STITECH TROUBLESHOOTING GUIDE

• Voltage problems

Serger stitches troubleshooting. You will need to know how to adjust the tension on your serger as this is a valuable skill. You will need to adjust the tension every time you change stitch, thread type or fabric. Any new deviations from a certain voltage change the operation of the machine. That’s why it’s important to know how to get a balanced serger stitch and know how to fix it if it doesn’t work for you. To avoid this problem in the future, you will need to familiarize yourself with the tension settings for the different color treads and each needle knife. It helps to know the treads in each stitch.

• Stitch problems

The stitch problem is also common with sergers and the needle becomes the main culprit whenever stitches skip. The cookware may be broken or you are using the wrong type or size. In addition, the quality of the stitches can be a consequence of the type and quality of the thread. So you should make sure you get the best fibers to keep your machine working properly. You will need to check the needles to make sure they are in place or damaged. If you suspect that they are damaged, it is time to replace them. Make sure you put on the correct needle for the job.

• Thread problems

Thread piles are one of the main problems when sewing fabric. If you see one knot on the thread, there are probably several. Although the thread knot problem is quite common, you can solve it by cutting the extra thread to free it up. Do not pull on it, you risk damaging the machine and the entire fabric. Once your project is free, you can remove any cut pieces of thread. Fabric jam problems

This is a common problem and happens if the bobbin thread is not wound evenly on the bobbin. Another cause of a thread jam can be a thread that is too tight or a loss of thread tension. Also, the combination of fabric, thread size and needle size can be incorrect. This is another common problem with fabric jamming in your sewing machine. But you can easily fix this by removing the fabric you sewed. You will need to be careful to gently pull the fabric and lift it so that you can cut the threads and then pull the machine out without the fabric.

• Problem with needles

There are also certain problems with the needle that can interrupt your work. In some cases, the needle breaks. Sometimes it also gets bent or damaged. You may also notice that the needle always hits the plate. To ensure that the needle is not damaged, you should make sure that it is inserted correctly and that the back part is pushed into the machine as far as possible. To ensure that the needle doesn’t get damaged, broken or bent, make sure you use the right size needle and thread, as well as the right fabric.

SERGER STITCHES TROUBLESHOOTING REVIEW

• Serger Troubleshooting

Serger stitches troubleshooting. Sergers, over lockers…whatever you call them, they can really help make sewing a garment look a little more professional. But sergers can be a little intimidating with all the buttons and threads. It’s important to clean your serger regularly to keep it free of dust and lint, especially after particularly messy projects, but we’ll get to that another time. In general, if your serger is misbehaving, it probably needs new needles or threading.

• Needles

Let’s start with needles. Most sergers use the same needles as the machine and don’t need anything special. I usually use 90/14 stretch needles because I mostly sew knits with them, but you would want your needles to match your fabric. You will need to change them regularly, just like with a regular machine. When installing the needles in home machines, make sure that the flat part is towards the back, push them in as far as they will go and tighten them well.

• Threading the serger

Next, threading your serger. Be sure to follow the instructions, but here are some other tips as often when your serger isn’t sewing nicely, it’s because it doesn’t have the correct thread. The best thing to do is to reverse all voltages to zero as soon as you start. My machine, and every one I’ve owned before, started with the top looper, then the bottom, then the needles. The order matters to make sure it chains for you. Start with the top thread of the looper and follow the marked guide. Pull the thread through the tension pulleys as if you were threading to make sure it’s all there.

• Tension

Now that you have new needles and threads, what if your stitch doesn’t look perfect? Let’s learn which buttons to edit. You want the two loops to meet at the edge of the fabric, not more at the top or bottom or side or pulling it inward. Adjust the bottom and top loops until they touch this edge. If the top looper is too tight and/or the bottom looper is too loose, the stitch will meet at the top. The needle threads should be visible as individual stitches on the top, but you can’t see them on the back.

SERGER TROUBLESHOOTING THREAD BREAKING TIPS

Serger stitches troubleshooting. Serger machines sew at a very high speed, which puts enormous stress on the threads. Most of these threads work fine on most of our machines, but as more and more of our machines are converted to PCs and the mechanisms that work on them become more and more hidden, it can be frustrating and confusing to troubleshoot when our threads repeatedly break. , especially when you’re trying to squeeze in that last-minute gift or sewing the final quilting details on a tailored wool jacket. Steps to resolve thread breakage issues:

• Thread the needle again.

Be sure to catch the thread by the spool before it passes through the tension discs and pull the broken thread through the machine from the end of the needle. Do not pull the thread through the bobbins towards the spool as this could wear out important parts over time and require expensive repair. Then remove the thread from the bobbin and rethread the needle according to the threading instructions for your machine.

• Replace the needle.

Even if the needle is brand new in your machine, the needles may have small burrs or imperfections that cause the threads to break. Make sure the needle is also the right size and type for the thread. If the eye of the needle is too small, the thread may fray more quickly and cause more frequent breaks. A smaller needle will also create smaller holes in the fabric, causing more friction between the thread and the fabric. Embroidery and metal needles are designed for special threads and protect them from excessive stress. For frequent breaks, try a new needle, a quilting needle with a larger eye, a specialty needle, or even a larger size needle.

• Replace the coil.

Bobbin replacement is not mentioned in the popular literature, but it can stop repeated thread breaks. Sometimes when bobbins fall, especially if they are pre-wound bobbins, they put more tension on the needle thread, causing it to break. The spool may not be near the end, but it’s worth replacing rather than dealing with constant thread breakage. This happens more on some machines than others. Another problem with pre-wound bobbins is that when they get to the last few feet of bobbin thread, the thread can wrap around itself, causing the needle thread to break.

• Check the thread path.

This is especially valuable for serger problems. Make sure the thread follows a smooth path from the bobbin, to the tension discs or bobbins, and to the needle. The thread may have jumped out of its proper path at some point, which may or may not be visible. The shoulder is often to blame here. Re-threading will solve this problem. There are also many places where the thread can get caught. Some thread may fall off the spool and get caught around the spool pin. If there are other threads hanging nearby, they can get tangled in the sewing thread.

BASIC TROUBLESHOOTING TOOLS FOR SERGER

• Serger Needles

Serger stitches troubleshooting. As with a sewing machine, choosing the right needle for your serger makes a big difference in the quality of your project. The size and type of needle depends on your thread and the characteristics of the fabric. Each serger needs one or more needles. Many sergers use conventional sewing machine needles (130/705H system), but not all use them, so check the manual first.

• Needle inserter

If you need help removing and changing needles due to poor vision or poor dexterity, the needle inserter will hold your new needle in the correct orientation as it is inserted into the needle clamp. For example, if you’re going to go from 4-thread through lock to 2-thread rolled hem and back again, you’ll find yourself removing and replacing needles frequently.

• Threads

There are so many types of thread that will work with a serger. Part of the fun of serging is figuring out which threads to combine with which stitches to create fun decorative effects. However, you can create many cool effects with your serger. When choosing a thread, choose a quality thread. Then you won’t have to worry about fraying, breaking, excessive fraying or skipping stitches due to bad thread. A high-quality thread will be smooth to the touch, with no fibers sticking out of it and only a minimum of fibers sticking out.

CONCLUSION

Serger stitches troubleshooting. A serger is a useful tool when in perfect working order for sewing garments. In addition to knitting, she also performs other tasks. By changing the tension on the serger, different finishes and stitches can be created. While the serger is a great tool, the experience can be frustrating when the tension gets outside the wound. Fortunately, there are ways to resolve this and continue working. Some of the common tension problems include problems with fabric creases, loops on the underside seem to stretch, scissor threads are removed towards the right side of the fabric, and upper knife threads are pulled towards the underside of the fabric.