WHICH OVER LOCK MACHINE IS THE BEST

Which over lock machine is the best .Overlock sewing machines are also known as sergers. These machines are mainly used in garment finishing to give the insides a sleek and professional look. They can also be used to construct complete garments, as you can also sew and topstitch on some of them at the same time. Over locker because it offers versatility in the types of finishes you can apply to your garments.

Overlock machines were originally used for industrial sewing. Today, however, thanks to progress and advanced technology, they have reached the homes of ordinary people. A serger, or toggle machine as it is also called, is a device used to cover stitches and close the raw edges of materials to prevent them from fraying. The serger is also used to trim the excess seam so you don’t have to do it by hand later when the sewing is done.

Sergers do a great job of hemming, hemming and hemming and are used to give your garment a professional look and finish. While you could argue that a regular sewing machine can do the same thing, that wouldn’t be entirely true. Unlike sewing machines, a serger uses a looper to feed multiple cones of thread and also makes the stitches much more flexible, which is essential if you want your clothes or some decorative items to last longer.

[lwptoc]

TOP THREE BEST OVER LOCK MACHINES- WHICH OVER LOCK MACHINE IS THE BEST

 SINGER Pro Finish 14CG754 Overlock Machine

Which over lock machine is the best .Because it is one of the top rated lock machines by users. Threading this machine requires you to be patient and watch enough videos on the subject. Think carefully and pay attention to the instructions, once you master the threading, you will realize that it is such a simple machine that even a beginner can learn its wonders. As always, after the initial learning curve, you’ll be able to try out the locks before you buy the more expensive ones.

It’s really one of the cheaper options and happens to make beautiful stitches, but note that if you’re left-handed, it will be a bit difficult to thread. Finally, some say it can be a bit noisy, but again no more than a regular sewing machine. It’s really one of the cheaper options and happens to make beautiful stitches, but note that if you’re left-handed, it will be a bit difficult to thread. Finally, some say it can be a bit noisy, but again no more than a regular sewing machine.

PROS

• Reasonably priced for a beginner
• Free arm for cuffs and trousers.
• Extra-high pressure presser foot lifter for quilting thick fabrics.
• LED lighting that lasts longer and stays cool to the touch.

CONS

• Tricky threading if you don’t have the right advice, although now you do.
• The lacing system is not recommended for people with arthritis.

 Brother 1034DX Overlock Machine

If you’re right-handed and want to get a bestseller that fits on a tight budget, the Brother 1034DX is the perfect cabinet for you. You can do a lot more with this lock machine than just move seams. You can get as creative as you want with rolled hems, blind hems, or ruffles, plus finish hems on durable fabrics, blankets, or four layers of hemp fleece without snagging. In fact, the stealth blade would also allow you to use it as a measuring point to slide over the edge of your project without cutting when not in use. However, you should only buy this thru-lock model over other brands like Janome or Juki, unless you can afford the more expensive 3-4 thread.

PROS

• Designed for right-handed users.
• LED light for a brighter workspace.
• Gathering and blind leg hem included.
• Save a lot of money on needles as it requires standard sewing machine needles.
• Free arm.

CONS

• Loud vibrations, which you can solve by placing a cork base under it.

Janome MOD-8933 Overlock Machine

A big plus for the Janome MOD-8933 is that the machine covers open up to make the entire thread route easily accessible, so it’s also very accessible for cleaning and lubrication. Its retractable top knife allows you to work on projects that don’t necessarily require cutting fabric, which increases safety, especially for beginners who are new to zip threading and less familiar with all of its components.

Like some other machines, this model comes with rubber feet to help keep the stitch in place while locking in place to keep the stitch even and precise. Another interesting detail is that this model has rotary controls located on the right side of the machine, which makes it especially suitable for right-handed users.

PROS

• Heavier than Brother Models, making it more stable when over locked.
• Stronger loopers than Brother Models are therefore less prone to cracking and breaking.
• Dust cover included.

CONS

• No free arm.
• No double thread stitches, only 3 and 4 threads.
• Does not require standard sewing machine needles.

THREADING AND SEWING ON MACHINERY ABOVE THE GROUP – WHICH IS BEST ON THE CASTLE

Which over lock machine is the best .Before threading the machine, open the front cover and raise the presser foot and upper knife. Place the thread stand on the back of the machine with the four spools of thread. Most cabinets will have four spool holders for four threads and it pays to practice using a different thread color for each of the four threads so you can tell them apart easily.

A good machine will have a color coded guide that you methodically follow and follow the thread guides down and successfully thread the machine. Use tweezers to thread difficult places where your fingers can’t reach. Make sure all your threads stick out of the back of the machine and have a long end to prevent them from pulling out. After threading, put down the presser foot and upper knife, close the front cover and thread a piece of fabric to start.

To begin sewing, place your left hand on the fabric and press gently until the tip of the fabric rests just behind the presser foot. To finish the sewing, chain stitches a few cm long at the end of the sewing, so that the thread does not come loose and need to be rethreaded. To replace the loop thread, cut the existing thread near the spool, thread the new thread through the spindle and tie to the end of the first thread. Raise the presser foot and set the tension to “0” so that the knot can pass smoothly, and pull the thread until it is far behind the presser foot.

SPECIAL FEATURES OF OVER LOCK MACHINE – WHICH OVER LOCK MACHINE IS THE BEST

Which over lock machine is the best .Some machines have different pressure feet to help sewers with special needs. There are feet for sewing rolled hems and for applying elastic, lacing and fixing tape to seams. Blind hem feet may be available. A rolled hem may also require a special throat plate. Note which ones come with the machine and which ones need to be purchased as accessories.

• Try Overlock

When researching machines, try several makes and models. Thread each several times. If necessary, use the supplied tweezers and needle threader. Change the threads by tying the top knot to see if the tension wheels need to be adjusted so that the knotted threads can flow easily. Change the neck and needle(s) to see how easily this can be done and adjust the stitch length and width. Use different types of thread to determine how the tension is drawn.

Use different weights and types of fabric when trying to overlay. Stitch individual thicknesses and two or more layers of fabric. Adjust the pressure of the presser foot to make matching cubes or stripes a simple process. Check the expansion of the seams you are sewing. Consider the price of the machine in light of all the above factors. Take enough time to make a decision that will give you the best performance and true satisfaction. Sometimes it’s smarter to pay a little more, especially when it comes to good service and peace of mind.

• Caring for the machine

Once you’ve made your choice, you’ll want to keep the machine in good working order. Keep it free of lint and strays. Use the supplied brush to remove lint from the inside of the machine. Blow quickly on areas that tend to collect large amounts of lint; canned air is available for this purpose, or it uses your vacuum cleaner or hair dryer.

Oil the places recommended in the instructions for use and maintenance. Use oil specially designed for machines. Avoid excessive lubrication. Replace the machine needle if it is dull or bent. Both factors can cause stitches to skip. Replace the knife blade(s) when the seam edges start to look ragged.

HOW MANY THREADS DOES AN OVER LOCK MACHINE NEED – WHICH OVER LOCK MACHINE IS THE BEST

Which over lock machine is the best .The over locker can use up to 5 different spools of thread to create a stitch. The number of threads an over locker has may vary depending on the model. Most models come with 4 threads. Since 5-thread cabinets cost significantly more, you have to ask yourself, “Do I really need 5 threads? Below are the individual thread formations and what they are most commonly used for.

1-Thread Overlock Stitch – If you sew a lot, you’ll be using the 1-thread overlock stitch quite often, as it’s very good for both blunt stitching and end-to-end stitching.

2 Thread Overlock Stitch – The 2 thread overlock stitch has many uses, one of my favorites in particular is that it adds a very nice edge to sewing projects. In addition, they are also good for attaching elastic and lace, flat sewing and everyday hemming.

3 Thread Overlock Stitch – These are often used for sewing but lack the power of using 4 threads. They offer a bit more flexibility than 4 ply, which is good, but I would avoid using them in high stress areas.

4 Thread Overlock Stitch – This is the most commonly used overlock stitch, and for good reason. One of the best features of this stitch is its strength and the fact that it has some flexibility. Ideal for sewing and providing a firm surface on woven fabrics, you’ll be using this one often.

5 Thread Overlock/Safety Stitch – The most expensive over locks for sale are 5 thread. They are capable of sewing with a 5-thread safety stitch, which is ideal for creating very strong seams on heavier fabrics such as denim.

CONCLUSION

Which over lock machine is the best. Over lockers were first used in an industrial setting as a fast and reliable way of sewing over the edges of garments to obtain a high quality and very durable finish. Furthermore, they are also used for hemming, hemming, flat locking and for creating decorative borders. Thanks to technological advancements, they are now much more compact and affordable than before, allowing people to have them in their own home.